Skip to main content
Well Drilling Directory Get Quotes

HomePennsylvaniaWell Depth by County › York County

How Deep Are Wells in York County, PA?

The median residential well in York County is 200 ft deep, based on 20,576 completion reports filed with the Pennsylvania Department of Conservation and Natural Resources. Most fall between 100 and 375 ft; the deepest on record is 1690 ft.

That is 27 ft deeper than the Pennsylvania state-wide average of 173 ft (an n-weighted average across every Pennsylvania county with reported data). Depth depends on local geology, your own site could sit well outside York County's typical range.

Source and method: Pennsylvania Department of Conservation and Natural Resources Pennsylvania Groundwater Information System (PaGWIS), via PASDA, extracted 2026-07-14. Figures include only wells recorded as residential (domestic) use, with a reported depth between 15 and 2,000 ft (to exclude likely data-entry errors). PaGWIS carries no completion date, so figures cover all domestic wells on record rather than only recent ones, and the records are compiled from driller-submitted and historical sources at varying reliability that DCNR does not independently verify. These are figures self-reported by licensed drillers to the state; treat this as a planning reference, not a guarantee for any specific property.

York County well depth at a glance

MetricValue
Median depth200 ft
Typical range (10th-90th pct)100-375 ft
Full range on record15-1690 ft
Completion reports used20,576
Pennsylvania state-wide average (weighted)173 ft
Estimated drilling cost at county median$5,000-$13,000

Cost estimate is the county median depth (200 ft) times HomeAdvisor's national $25-$65 per-foot drilling range, cited on our cost guide. It covers drilling only, not casing, pump, or pressure tank, and it is a planning range, not a quote. Try the well cost estimator with this county's median pre-filled as a starting point.

Frequently asked

How deep is a well in York County, PA?

The median residential well in York County is 200 ft deep, based on 20,576 completion reports filed with the Pennsylvania Department of Conservation and Natural Resources. Most wells fall between 100 and 375 ft; the deepest on record is 1690 ft.

How much does it cost to drill a well in York County?

Using the county's 200 ft median depth and the national $25-$65 per foot drilling range HomeAdvisor reports, a well drilled to the local median would run roughly $5,000 to $13,000 for drilling alone, before casing, pump, or pressure tank. That is a planning range, not a quote, get quotes from licensed local contractors for your property.

Who can drill a well in York County, PA?

Check any contractor's current license status before hiring; requirements vary by state. See our guide on how to hire a licensed well driller, or browse listed contractors serving Pennsylvania.

Ready to get quotes for your property?

Tell us about your project and we'll pass your details to a well driller serving York County, PA.

Request a Quote

Or browse well drilling companies in Pennsylvania.

See the full Pennsylvania well depth by county table, or the guide to hiring a licensed well driller.

Get Quotes