Skip to main content
Well Drilling Directory Get Quotes

HomeNew YorkWell Depth by County › Putnam County

How Deep Are Wells in Putnam County, NY?

The median residential well in Putnam County is 400 ft deep, based on 1,220 completion reports filed with the New York State Department of Environmental Conservation. Most fall between 205 and 705 ft; the deepest on record is 1330 ft.

That is 202 ft deeper than the New York state-wide average of 198 ft (an n-weighted average across every New York county with reported data). Depth depends on local geology, your own site could sit well outside Putnam County's typical range.

Source and method: New York State Department of Environmental Conservation water well completion reports (NYS GIS Clearinghouse), extracted 2026-07-14. Figures include only wells recorded as residential (domestic) use, with a reported depth between 15 and 2,000 ft (to exclude likely data-entry errors). This dataset carries no completion date, so figures cover all domestic wells on record rather than only recent ones, and DEC notes the driller-submitted data are in most cases not verified. These are figures self-reported by licensed drillers to the state; treat this as a planning reference, not a guarantee for any specific property.

Putnam County well depth at a glance

MetricValue
Median depth400 ft
Typical range (10th-90th pct)205-705 ft
Full range on record20-1330 ft
Completion reports used1,220
New York state-wide average (weighted)198 ft
Estimated drilling cost at county median$10,000-$26,000

Cost estimate is the county median depth (400 ft) times HomeAdvisor's national $25-$65 per-foot drilling range, cited on our cost guide. It covers drilling only, not casing, pump, or pressure tank, and it is a planning range, not a quote. Try the well cost estimator with this county's median pre-filled as a starting point.

Frequently asked

How deep is a well in Putnam County, NY?

The median residential well in Putnam County is 400 ft deep, based on 1,220 completion reports filed with the New York State Department of Environmental Conservation. Most wells fall between 205 and 705 ft; the deepest on record is 1330 ft.

How much does it cost to drill a well in Putnam County?

Using the county's 400 ft median depth and the national $25-$65 per foot drilling range HomeAdvisor reports, a well drilled to the local median would run roughly $10,000 to $26,000 for drilling alone, before casing, pump, or pressure tank. That is a planning range, not a quote, get quotes from licensed local contractors for your property.

Who can drill a well in Putnam County, NY?

Check any contractor's current license status before hiring; requirements vary by state. See our guide on how to hire a licensed well driller, or browse listed contractors serving New York.

Ready to get quotes for your property?

Tell us about your project and we'll pass your details to a well driller serving Putnam County, NY.

Request a Quote

Or browse well drilling companies in New York.

See the full New York well depth by county table, or the guide to hiring a licensed well driller.

Get Quotes